Defines a reference and an opposing face to control the ply layout of a composition.



The reference face can be set manually by selecting a face. If the opposing face is parallel to the reference face, a suggestion for the opposing face is given and can either be accepted or be changed.

Note: If one of the plies of the composition has a variable thickness, the reference and opposing face can be non-parallel. In this case the fixed thickness plies are set out starting from the reference face, and the remainder of the solid is filled by the variable ply.

Solids without composition

Multiply composition assigned

Reference faces are either wrong or not found

Defining reference face (1) and opposing face (2)

Attaching a composition

Reference faces highlight



Select manually
Selects the opposite face manually.