LCONNECT command

Creates or modifies an L-connection between solids.

BricsCAD Pro; BricsCAD Mechanical; BricsCAD BIM

Icon:

Description

Creates or modifies an L-connection between solids. Optionally disconnects L-connected solids.

Before After

Options

Select entities to connect
Manually select the two entities you want to connect.
Switch
Allows to choose between two butted L-connections:
or

or a mitered L-connection:

or a touching (disconnected) connection:

Note: If the HOTKEYASSISTANT is set ON, press Ctrl key to cycle between the connection types.