SMUNFOLD comando

Crea una representación desplegada en 2D o 3D de una pieza de chapa.

BricsCAD Mechanical

Iconos:

Método

Select the base flange of the sheet metal part, specify a point in the drawing to place the unfolded body and press Enter to keep the unfolded body in the drawing or choose an option.

Opción dentro del comando

Asociativo
Opens an additional window with the model's unfolded representation. Both folded (left) and unfolded (right) representations have bidirectional associativity which allows transferring modifications to the neighbor model automatically when changing window focus.
Note: Tangent bends, jogs (with and without flange) and hems (all types, except closed hems) are also supported.
salvar geometría 2D
Saves the 2D geometry of the unfolded metal part as a separate drawing file.
From the Standard Save File dialog box you have to choose to save the drawing either in Drawing Exchange Format (*.dxf) or in Standard Drawing File (*.dwg).
slavar geometría 3D
Saves the 3D solid of the unfolded metal part as a separate drawing file.
From the Standard Save File dialog box displayed you have to choose to save the drawing either in Drawing Exchange Format (*.dxf) or Standard Drawing File (*.dwg).
Colocar vista al diseño
Coloca la vista en un diseño nuevo o en uno ya existente.
Optimizar anotaciones de pliegues
Optimiza las anotaciones de plegado en la geometría exportada.
Mantener
Coloca el sólido 3D desplegado en el dibujo actual.