Go to bricsys.com
Try BricsCAD
Toggles Apparent intersection entity snap; snaps to the intersections of entities, even when they only appear to intersect in 3D space.
Accessing the Command
command bar: apparent
transparent: apparent
aliases: app, planviewint, 2dintersection
toolbar: Entity Snaps |
ribbon: Home | Entity Snaps | Snap to Apparent
: apparent
Displays no prompt in the command bar. Each time you enter the command, it toggles the apparent entity snap mode, from on to off, to on again.
This entity snap snaps to intersecting entities, including those that appear to intersect in 3D space.
Command Option
|
Option |
Description |
|
Apparent |
Entering this command toggles apparent intersection (2dInsersection) entity snap This command can be entered transparently during commands, but must be entered without the apostrophe prefix ( ' ). |
Related Commands
OSnap - toggles entity snap modes in the Settings dialog box.
-OSnap - toggles entity snap modes in the command bar.
Aperture - sizes the aperture cursor for entity snaps.
2dIntersection - toggles apparent intersection snap mode.
3dIntersection - toggles intersection snap mode.
Center - toggles center snap mode.
Endpoint - toggles endpoint snap mode.
Extension - toggles extension snap mode.
From - allows to enter relative coordinates with respect to a reference point.
GCenter - toggles Geometric Center (GCenter) entity snap.
Insertion - toggles insertion snap mode.
Intersection - toggles intersection snap mode.
Midpoint - toggles midpoint snap mode.
Mtp - allows to specify a point as the midpoint between two points.
Nearest - toggles nearest snap mode.
Node - toggles node (point) snap mode.
None - turns off all entity snap modes.
Parallel - toggles parallel snap mode.
Perpendicular - toggles perpendicular snap mode.
Quadrant - toggles quadrant snap mode.
Tangent - toggles tangent snap mode.
