Go to bricsys.com
Toggles Intersection entity snap, which snaps to the intersection of two entities.
Accessing the Command
command bar: 3dintersection
transparent: 3dintersection
alias: intersection
toolbar: Entity Snaps | 
ribbon: Home | Entity Snaps | Snap to Intersection
: 3dintersection
Displays no prompts in the command bar. Each time you enter the command, it toggles the entity snap, either on or off.
This entity snap snaps to entities that physically intersect each other; to snap to apparent intersections, use 2dintersection entity snap.
Command Options
|
Option |
Description |
|
3dIntersection |
Entering this command toggles Intersection entity snap mode. This command can be entered transparently during commands, but must be entered without the apostrophe prefix ( ' ). |
Procedure
Related Commands
OSnap - toggles entity snap modes in the Settings dialog box.
-OSnap - toggles entity snap modes in the command bar.
Aperture - sizes the aperture cursor for entity snaps.
2dIntersection - toggles apparent intersection snap mode.
Apparent - toggles apparent intersection snap mode.
Center - toggles center snap mode.
Endpoint - toggles endpoint snap mode.
Extension - toggles extension snap mode.
From - allows to enter relative coordinates with respect to a reference point.
GCenter - toggles Geometric Center (GCenter) entity snap.
Insertion - toggles insertion snap mode.
Intersection - toggles intersection snap mode.
Midpoint - toggles midpoint snap mode.
Mtp - allows to specify a point as the midpoint between two points.
Nearest - toggles nearest snap mode.
Node - toggles node (point) snap mode.
None - turns off all entity snap modes.
Parallel - toggles parallel snap mode.
Perpendicular - toggles perpendicular snap mode.
Quadrant - toggles quadrant snap mode.
Tangent - toggles tangent snap mode.
