Deforms one or more connected faces of a 3D solid/surface by replacing their edges with given curves.
Accessing the Command
command bar: dmdeformcurve
menu bar: Model | Direct Modeling | Deform | Transform Curve
toolbar: Direct Modeling | Transform Curve
- Home | Solid editing | Transform Curve
- Solid | Deform | Transform Curve
- Surface | Deform | Transform Curve
Quad cursor menu: Model | Transform Curve
Prompts you in the command bar:
Select edge to deform or [add Faces] <done>: (Select an edge.)
Select target curve: (Select a curved to replace the selected edge with.)
Select edge to deform or [add Faces] <done>: (Select an edge or press Enter to conclude the command.)
Allows to select additional faces to deform (in addition to the faces adjacent to selected edges).
Select additional deformable faces: (Select a face.)
Entities in set: 1
Select additional deformable faces: (Select a face or press Enter to stop selecting additional faces.)
DmDeformMove - deforms one or more connected faces of a 3D solid/surface by moving and rotating their edges.
DmDeformPoint - deforms a region, one or more connected faces of a 3D solid or a surface by moving a point lying on one of them in arbitrary 3D direction.
DmTwist - modifies a 3D solid, surface or region by twisting a portion defined by two points around an axis.