Allows to walk or fly through models using the well-known approach used in computer games.
Accessing the Command
command bar: navigate
menu bar: View | Navigate
toolbar: View |
Quad: General |
Prompts you in the command bar:
Flight mode is Off, STEPSIZE=30, STEPSPERSEC=10
>>Press Esc to quit or right click to modify navigation settings.
Hover the mouse cursor over the target location and hold down a navigation key as indicated in the table below. Move the cursor to change the target location.
|A||Left Arrow||Move to the left|
|W||Up Arrow||Move forward|
|S||Down Arrow||Move backward|
|D||Right Arrow||Move to the right|
|F||Toggles Flight Mode ON/OFF. Flight mode OFF (= Walk Mode) restricts the movements to the XY-plane.|
|Esc (Escape)||Exits the navigate command.|
Hold down the left button and drag
Brings up the Navigation Settings dialog.
The number of steps is saved in the drawing through the STEPSPERSEC system variable.
The size of the steps is saved in the drawing through the STEPSIZE system variable.
The rotation speed is saved in the registry through the RTRotationSpeedFactor user preference.
RtRot - rotates 3D drawings in real-time.
RtWalk - walk left / right and forward / backward in a 3D scene.