Go to bricsys.com
Try BricsCAD
Toggles Node entity snap mode, which snaps to the following entities with nodes:
- Point entities
- Text insertion points
- Mtext insertion points
- Attribute insertion points
- Table insertion points
Accessing the Command
command bar: node
transparent: node
alias: nod
ribbon: Home | Entity Snaps | Snap to Node
status bar: right-click ESNAP, choose Node
toolbar: Entity Snaps |
: node
Displays no prompts in the command bar.
When node entity snap is on, the cursor snaps to point entities, including mtext entities.
Command Options
|
Option |
Description |
|
Node |
Each time the command is entered, it toggles Node entity snap on and off. When on, it snaps to point, mtext, and other entities. This command can be entered transparently during commands, but must be entered without the apostrophe prefix ( ' ). |
Related Commands
OSnap - toggles entity snap modes in the Settings dialog box.
-OSnap - toggles entity snap modes in the command bar.
Aperture - sizes the aperture cursor for entity snaps.
2dIntersection - toggles apparent intersection snap mode.
3dIntersection - toggles intersection snap mode.
Apparent - toggles apparent intersection snap mode.
Center - toggles center snap mode.
Endpoint - toggles endpoint snap mode.
Extension - toggles extension snap mode.
From - allows to enter relative coordinates with respect to a reference point.
GCenter - toggles Geometric Center (GCenter) entity snap.
Insertion - toggles insertion snap mode.
Intersection - toggles intersection snap mode.
Midpoint - toggles midpoint snap mode.
Mtp - allows to specify a point as the midpoint between two points.
Nearest - toggles nearest snap mode.
None - turns off all entity snap modes.
Parallel - toggles parallel snap mode.
Perpendicular - toggles perpendicular snap mode.
Quadrant - toggles quadrant snap mode.
Tangent - toggles tangent snap mode.
