-PdfAttach

PDF Underlay file

Specifies the file name of the PDF file to attach:

• Type the path and name of the PDF file
• Press ~ to display the file dialog box

PDF Underlay page number

(This prompt does not appear when the PDF file has just one page.) Specifies the page number of a multi-page PDF file to insert:

• Type the page number
• Press Enter to accept the current page number

Insertion point

Specifies the insertion point in the drawing:

• Pick a point in the drawing
• Enter x,y coordinates for the lower left corner of the PDF attachment

Scale

Specifies the size of the PDF underlay:

• Enter a scale factor:
  Larger than 1.0 increases the size of the underlay
  Smaller than 1.0 makes the underlay smaller
• Move the cursor to dynamically size the underlay

Size

Sets the size of the insert dynamically; prompts you:

Specify opposite corner - (pick a point.)

The first point is the insertion point. As you move the cursor, the program ghosts the size and position of the underlay relative to the insertion point.

XY Scale factors

Scales the underlay separately in X- and Y direction differently; prompts you:

1. Specify X scale factor <1.00> - (type a value or pick a point.)

2. Specify Y scale factor < Equal to X scale factor <1.00> - (enter an option):

• Press Enter to set the Y scale factor equal to the X scale factor
• Pick a point in the drawing
• Type a value

Rotation angle

Specifies the angle of the underlay:

• Enter an angle:
  Positive numbers rotate the underlay counter clockwise from the x-axis
  Negative numbers rotate it clockwise
• Move the cursor to dynamically rotate the underlay