DmChamfer

Creates an equal distance chamfer between adjacent faces sharing a sharp edge.

Accessing the Command

command bar: dmchamfer
menu bar: Model | Direct Modeling | Chamfer
toolbar: Direct Modeling | Chamfer
ribbon: Solid | Edit | Chamfer
Quad cursor menu: Model | Chamfer

: dmchamfer

Prompts you in the command bar:

Select edges to create chamfer: (Select the edges you want to chamfer. Press and hold the TAB key to select hidden geometry. Press Enter to stop selecting.)

The chamfer is applied dynamically. To define the chamfer distance, do one of the following:

• Click the left mouse button
• Type a value in the dynamic input field.

Related Commands

DmDelete - deletes faces and solids.

DmExtrude - creates a 3D solids by extruding closed 2D entities or regions.

DmFillet - creates a smooth fillet between adjacent faces sharing a sharp edge.

DmMove - moves the selected faces or edges of a solid using a vector.

DmPushPull - adds or removes volume from a solid by moving a face or surface.

DmRevolve - Creates 3D solids by revolution of closed 2D entities or regions about an axis.

DmRotate - rotates faces of a solid around an axis.

Chamfer - creates chamfers; adds an angle to intersections.

Fillet - fillets intersections; joins intersecting lines with an arc of any suitable radius.