DmCopyFaces – Bricsys Support and Help Center

Copies a set of 3D solid faces forming a feature (e.g. hole, rib or protrusion) to a new position on the same or another 3D solid.

Accessing the Command

command bar: dmcopyfaces

menu bar: Model | Direct Modeling | Copy Faces

toolbar: Direct Modeling | Copy Faces

ribbon:

Quad cursor menu: Model | Copy Faces

: dmcopyfaces

Prompts you in the command bar:

Select several entities/subentites: (Select one or more entities.)

Entities in set: 1

Select several entities/subentites: (Select more entities or, press Enter stop selecting entities.)

Enter base point: (Pick a point.)

Select insertion point or [Rotate/mUltiple/MOde]: (Pick another point, or enter an option.)

Option	Description
Rotate	Allows to rotate the selected entities; prompts you: Specify rotation angle - (type a value) Select insertion point or [Rotate/mUltiple/MOde] - (pick a point or choose an option.)
Multiple	Allows to create multiple copies: prompts you: Select insertion point or [Rotate/mUltiple/MOde] - (pick a point or choose an option for the first copy.) Select insertion point or [Rotate/mUltiple/MOde] - (pick a point or choose an option for the next copy.) Select insertion point or [Rotate/mUltiple/MOde] - (pick a point or choose an option for the next copy or press Enter to stop.)
Mode	Toggles between various cutting options; prompts you: Cutting mode [Placement face/Select faces/No cut] <Placement face> - (choose an option.) Placement Face : Select Faces : No Cut :