Applies a radius constraint to cylindrical surfaces or circular edges.

## Accessing the Command

command bar: **dmradius3d**

menu bar: **Parametric | 3D Constraints | Radius**

toolbar: **3D Constraints | Radius**

ribbon:

**Solid | 3D Constraints | Radius****Surface | 3D Constraints | Radius****Assembley****| 3D Constraints | Radius**

Quad cursor menu: **Constraints |**** Radius**

: **dmRadius3d**

Select a face or circular edge: (Select a cylindrical surface or a circular edge)

Enter radius value <current value>: (Either press Enter to accept the current value, or type a new value.)

Press the TAB key to select obscured geometry.

In case the surface of an elliptical cylinder is selected, the surface is converted to a circular cylinder.

## Command Options

No options.

## Related Commands

MechanicalBrowserOpen - displays the Mechanical Browser.

DmConstraint3D - applies geometric relationships and dimensional constraints between subentities (faces, surfaces, edges, ...) of 3D entities.

DmUpdate - Forces 3d constraints to update.

DmCoincident3d - applies a coincident constraint between two edges, two faces or an edge and a face of two different solids.

DmConcentric3d - applies a concentric constraint between two cylindrical, spherical or conical surfaces.

DmFix3d - Applies a fixed constraint to a solid or to an edge or a face of a solid.

DmParallel3d - applies a parallel constraint between two faces of a solid or of different solids.

DmPerpendicular3d - applies a perpendicular constraint between two faces of a solid or of different solids.

DmRigidSet3d - Allows to define a set of entities or subentities as a rigid body.

DmTangent3d - applies a tangent constraint between a face and a curved surface of different solids.

DmAngle3d - applies an angle constraint between two faces of a solid or of different solids.

DmDistance3d - applies a distance constraint between two subentities of a solid or of different solids.