Go to bricsys.com
Try BricsCAD
Moves the entire drawing within the current viewport.
Accessing the Command
command bar: -pan
transparent: '-pan
alias: -p
shortcuts: PgUp
PgDn
: -Pan
Prompts you in the command bar:
Left/Right/Up/Down/PGLeft/PGRight/PGUp/PGDown/<Pan base point>: (Pick a point, or else enter an option)
Pan displacement point: (Pick another point)
Command Options
|
Option |
Description |
|
Pan base point |
Specifies the pan distance's starting point. |
|
Pan displacement point |
Specifies the ending point. |
|
Left |
Pans the drawing 5% to the right. The drawing is panned by 5% of the width of the current viewport. |
|
Right |
Pans the drawing 5% to the left. |
|
Up |
Pans the drawing 5% downwards. |
|
Down |
Pans the drawing 5% upwards. |
|
PaGe Left |
Pans the drawing 100% to the right. You can also press the Shift+Left cursor key. |
|
PaGe Right |
Pans the drawing 100% to the left. You can also press the Shift+Right cursor key. |
|
PaGe Up |
Pans the drawing 100% upwards. You can also press the Shift+Up cursor key. |
|
PaGe Down |
Pans the drawing 100% downwards. You can also press the Shift+Down cursor key. |
Related Commands
Pan - moves the drawing within the current viewport.
RtPan - pan the drawing in realtime.
Zoom - increases and decreases the size of the drawing within the current viewport.
RtZoom - performs real-time zooming of the drawing.
