The Edit vertices option of the Pedit command modifies individual polyline vertices.
When you select this option, the program switches into a special vertex editing mode and places an X on the first vertex. The X indicates the vertex you are editing. The Next and Previous options move the X to the next or previous vertex. You can edit only one vertex at a time.
When editing vertices, you can modify the polyline in the following ways:
The Peditext command is used in 2D Editing command group of the Quad cursor menu
Editing a polyline segment using the Quad
-
Move the cursor over the polyline.
If currently ON, the TIPS widget displays:
The available commands in the Quad apply to the entire polyline. -
Press the Ctrl-key to switch to segment mode.
The available commands in the Quad apply to the segment under the cursor. -
When the Quad cursor menu displays, do one of the following:
- Right click to execute the default Quad command.
- Move the cursor to the Quad and move to the Edit command group.
-
Select a command:
-
Add vertex: adds a vertex to the segment under the cursor.
-
Add vertex at end: adds as a new vertex at the end of the polyline.
This option is only available if the cursor is on one of the endpoints of a polyline. -
Adjust Bulge: Modifies the bulge factor of the segment under the cursor.
-
Delete segment: deletes the segment under the cursor.
-
Stretch segment: moves the segment under the cursor.
-
Stretch vertex: moves the vertex closest to the cursor.
-
Starting the polyline vertex editing mode
-
Do one of the following:
- Click the Edit Polyline tool button (
) on the Modify toolbar.
- Choose Edit Polyline in the Modify menu.
- Type editpline or pedit in the command window, then press Enter.
You are prompted: Select polyline to edit.
- Click the Edit Polyline tool button (
-
Select the polyline.
You are prompted: Edit polyline: Edit vertices/Close (or Open)/Decurve/Fit/Join/Linetype-Mode/Reverse/Spline/Taper/Width/Undo/<eXit>:
A prompt menu displays. -
Choose Edit vertices in the prompt menu or type E and press Enter.
You are prompted: Next/Previous/Angle/Break/Insert/Move/Regen/SElect/Straighten/Width/eXit/<Next>:
The Editpline prompt menu changes:
A triangle indicates the start point of the polyline. The first vertex of the polyline is selected.
Convert a straight polyline segment into an arc
-
Start the polyline vertex editing mode.
-
Select the start vertex of the segment you want to convert.
Choose Next vertex / Previous vertex in the prompt menu to select a vertex.
The X indicates the currently selected vertex. -
Choose Angle in the prompt menu or type A and press Enter.
The prompt menu closes.
You are prompted: Included angle for segment (>0 is ccw, 0 is straight, <0 is cw) <current angle>: -
Type a new included angle for the segment and press Enter.
The direction of an arc segment is as follows:- positive angles: counter clockwise
- negative angle: clockwise direction
- 0° for straight segments
-
Choose Exit in the prompt menu or type X and press Enter to leave the Polyline vertex editing mode.
-
Do one of the following:
- Continue editing the selected polyline.
- Choose Exit in the prompt menu or press Enter to conclude the Edit Polyline tool.
Break a polyline into two separate polylines
-
Start the polyline vertex editing mode.
-
Select the start vertex where you want to break the polyline.
Choose Next vertex / Previous vertex in the prompt menu to select a vertex.
The X indicates the currently selected vertex. -
Choose Break in the prompt menu or type B and press Enter.
You are prompted: Next/Previous/Select/Go/eXit/<Next>:
The prompt menu changes:
-
(option) Do one of the following to select a second vertex:
- Choose Next vertex / Previous vertex in the prompt menu.
- Choose Select in the prompt menu or type S and press Enter.
You are prompted to select a vertex.
-
Choose </p> in the prompt menu or type G and press Enter.
The polyline is broken into two polylines.
If a second point is selected in step 4 the segment(s) between the selected vertices is (are) deleted. -
Choose Exit in the prompt menu or type X and press Enter to leave the Polyline vertex editing mode.
-
Do one of the following:
- Continue editing the selected polyline.
- Choose Exit in the prompt menu or press Enter to conclude the Edit Polyline tool.
Insert a new vertex in a polyline
-
Start the polyline vertex editing mode.
-
Select the start vertex of the segment where you want to insert a vertex.
Choose Next vertex / Previous vertex in the prompt menu to select a vertex.
The X indicates the currently selected vertex. -
Choose Insert vertex in the prompt menu or type I and press Enter.
You are prompted: Location for new vertex: -
Specify the location for the new vertex.
The new vertex is inserted. -
Choose Exit in the prompt menu or type X and press Enter to leave the Polyline vertex editing mode.
-
Do one of the following:
- Continue editing the selected polyline.
- Choose Exit in the prompt menu or press Enter to conclude the Edit Polyline tool.
Move a vertex in a polyline
-
Start the polyline vertex editing mode.
-
Select the vertex you want to move.
Choose Next vertex / Previous vertex in the prompt menu to select a vertex.
The X indicates the currently selected vertex. -
Choose Move in the prompt menu or type M and press Enter.
You are prompted: New location for vertex. -
Specify the new location for the selected vertex.
The vertex is moved. -
Choose Exit in the prompt menu or type X and press Enter to leave the Polyline vertex editing mode.
-
Do one of the following:
- Continue editing the selected polyline.
- Choose Exit in the prompt menu or press Enter to conclude the Edit Polyline tool.
Delete vertices in a polyline
-
Start the polyline vertex editing mode.
-
Select the vertex before the first vertex you want to delete.
Choose Next vertex / Previous vertex in the prompt menu to select a vertex.
The X indicates the currently selected vertex. -
Choose Straighten in the prompt menu or type S and press Enter.
You are prompted: Straighten: Next/Previous/Select/Go/eXit/<Next>: -
Do one of the following to select the vertex after the last vertex you want to delete:
- Choose Next vertex / Previous vertex in the prompt menu.
- Choose Select in the prompt menu or type S and press Enter.
You are prompted to select a vertex.
-
Choose Go in the prompt menu or type G and press Enter.
The vertices between the selected vertices are removed.
A straight segment is drawn between the selected vertices. -
Choose Exit in the prompt menu or type X and press Enter to leave the Polyline vertex editing mode.
-
Do one of the following:
- Continue editing the selected polyline.
- Choose Exit in the prompt menu or press Enter to conclude the Edit Polyline tool.
Change the width of a polyline segment
-
Start the polyline vertex editing mode.
-
Select the start vertex of the segment you want to change the width of.
Choose Next vertex / Previous vertex in the prompt menu to select a vertex.
The X indicates the currently selected vertex. -
Enter starting width <current width>:
-
Do one of the following:
- Type the new width in the command bar and press Enter.
- Click to define the width graphically.
You are prompted: Enter ending width <current width>:
-
Do one of the following:
- Type the new width in the command bar and press Enter.
- Click to define the width graphically.
-
Choose Exit in the prompt menu or type X and press Enter to leave the Polyline vertex editing mode.
-
Do one of the following:
- Continue editing the selected polyline.
- Choose Exit in the prompt menu or press Enter to conclude the Edit Polyline tool.
NOTE |
The new width is applied when you conclude the Edit Polyline tool in step 6. |