Command: BIM Drag
Overview: In this lesson, you learn how to move a 3D solid that is perpendicular to the selected face using the BIM Drag tool. Furthermore, you learn how to preserve connections between solids when BIM DRAG is executed on a face.
After completing this lesson, you will be able to:
- Move 3D solids along the normal of their selected face.
- Preserve connections between solids while dragging a single solid or multiple solids.
- Increase or decrease the geometry of the solid in size according to the process you use.
- Disable the connection between solids using the CTRL key.
Tutorial: How to use BIM Drag
Click here to watch
The BIM Drag tool allows you to move walls, slabs or linear elements on the highlighted face of a solid. For instance, BIM Drag tool can be used to move linear solids by highlighting/selecting the end or side face of a linear solid. Depending on the modeling operation, the connection between solids can be either preserved while dragging one or more solids at a time or solid (s) can be moved independently by disjoining the connectivity to other solid(s).
Procedure: Using BIM Drag on a 3D Solid
- Highlight/select any faces of the solid and select BIM Drag from the Quad (Quad: Model tab).
- Move the cursor to adjust the position of the moving solid in the dynamic dimension field, then click or enter a precise value in the dynamic dimension field and press Enter.
Note: A ruler appears to visually represent the distance over which you will move the entity.
- The Hotkey Assistant appears at the bottom of the screen showing the available options.
Note: The default mode is indicated by a blue frame.
- Select the Enable connectivity mode (1) option, to move the solid while preserving the connections between solids.
In the following illustration, the solid behavior is shown before and after applying the BIM DRAG in "Enable connectivity mode". The connectivity between walls, i.e. T- (3) and mitered (4) connections are preserved after dragging an inner wall surface (5).
- Select the Disable connectivity mode (2) option to move the solid while breaking the connections between solids.
Note: Hit the CTRL key to switch the connectivity modes from one to another. Alternatively, type "d" to disable connectivity or type "e" to enable connectivity.
In the following illustration, the solid behavior is shown before and after applying the BIM DRAG in "Disable connectivity mode". The connectivity between walls, i.e. T- (3) and L- (6) connections are disjointed after dragging an inner wall surface (5).