Displays the Point Cloud section of the Drawing Explorer.
Accessing the Command
Displays a dialog box:
|New||Attaches a BPT point cloud file to the current drawing, like the PointCloudAttach command.
Preprocess option, shown below.
Removes the selected point cloud from the current drawing.
Inserts additional copies of the existing point cloud files into the drawing; displays the Attach Point Cloud dialog box, like the PointCloudAttach command.
|Preprocess||Converts LAS, PTS, and PTX point cloud files into the BricsCAD BPT point cloud format; displays the Point CLoud Data File dialog box, like the PointCloudPreprocess command|
|Load||Toggles the display of the point cloud|
AttachmentsPanelOpen - displays the Attachments panel from which point clouds and other attachments can be loaded and controlled.
PointCloudAttach - opens a BPT point cloud file, and then attaches it to the current drawing.
PointCloudBoundary - sets the display of the bounding box of point clouds.
PointCloudColorMap - colorizes the points based on Intensity, Elevation, and Classification of the point cloud.
PointCloudCrop - crops a point cloud entity, displaying only the part of the point cloud inside or outside a prismatic or cylindrical volume.
PointCloudPointMax - defines the maximum amount of points shown per point cloud.
PointCloudPointSize - specifies the size of points.
PointCloudPointSize_Minus - decreases the size of points.
PointCloudPointSize_Plus - increases the size of points.
PointCloudPreprocess - converts point cloud files to BricsCAD BPT format.
PointCloudUncrop - removes all croppings from a point cloud.