Go to bricsys.com
Try BricsCAD
Maps details (solids, holes, finishing geometry, ...) related to selected base solids to similar base solids in the model and optionally outlines the detail in a grid.
Five variants of BIMPROPROGATE work on a limited set of situations:
- BIMPROPAGATEPLANAR Propagation of connections between planar elements (walls/slabs/roofs).
- BIMPROPAGATELINEAR Propagation of connections between linear elements (beams, columns, pipes, ducts and their connections to walls and slabs).
- BIMPROPAGATEPATTERN Propagation of a single element on a flat surface to multiple locations and grids; can be used to propagate lights, light switches, windows, air diffusers, etc.
- BIMPROPAGATEEDGES Propagation along the edge of a planar solid; can be used to propagate railings, gutters, borders, wall caps, etc.
- BIMPROPAGATECORNER Propagates details connected to three planar base solids (i.e., corners).
Accessing the Command
Keyboard: bimpropagate
Menu: BIM | Propagate | Propagate
Toolbar: BIM Propagate
Quad: Model | Propagate
Ribbon Tab | Panel: Model | Propagate
: BimPropagate
Promps you:
Select base solids: (Select a solid (1).)
Entities in set: 1
Select base solids: (Select a solid (2).)
Entities in set: 2
Select base solids: (Select more solids or press Enter.)
Select detail objects or detail sub entities (optional): (Select detail objects (3)or press Enter.)
Propagate detail as an extrusion of this 2D section? [Yes/No/Inflate first] <Yes>: (Press Enter or choose an option.)
Searching for similar connections
Creating the suggestions
Showing 4 application details
Resolving conflicts and extensions
Duration start BIMPROPAGATE: 0.571000
Showing 3 visible suggestions of total 3.
Choose next action [Apply all/Cancel] <Apply all>:
(Press Enter to apply the selected suggestions.)
Applying all xx visible suggestions
Command Options
|
Option |
Description |
|
Apply All |
Use window selection to select multiple widgets (
Click one of the selected widgets to modify the state of the entire selection set. |
| Inflate first |
Expands the sensitive zone (left) to include similar solids which are not connected yet (right) in the model (right). The edges of the initially detected detail are moved outward over a specified distance. Prompts you: Enter inflation distance: (Type a value).
|
: Selected suggestion. Click to switch to not selected.
: The detail will be applied, but there are several alternatives. Hovering over the icon to cycle between alternatives
: The detail will be applied, but interferences were detected
: Not selected suggestion. Click to switch to selected.
: Location of the original detail. Hover over the icon for more information. Click to apply original detail by adapted extrusion.
):
Procedures
The five flavours of BimPropagate
General procedure
Related Commands
BimPropagateCorner - Propagates details connected to three planar base solids (i.e., corners).
BimPropagateEdges - Propagates a detail along the edge of a planar solid; can be used to propagate railings, gutters, borders, wall caps, etc.
BimPropagateLinear - Propagates connections between linear elements (beams, columns, pipes, ducts and their connections to walls and slabs).
BimPropagatePattern - Propagates a single element on a flat surface to multiple locations and grids; can be used to propagate lights, light switches, windows, air diffusers, etc.
BimPropagatePlanar - Propagates connections between planar elements (walls/slabs/roofs).
