MoveGuided

After selecting the entities, their relation to their reference curves will automatically guide you to moving the entities in a similar location.

The command can be executed in pre-pick mode : select entities first, then launch the command; or post-pick mode: select entities in the command workflow.

Accessing the Command

Keyboard: moveguided
: moveguided

Prompts you:

If a selection set exists:

Select reference curves or [Region select]: (Select the first reference curves.)
Entities in set: 1
Select reference curves or [Region select]: (Select more reference curves, or press Enter.)

Else:

Pick first point of rectangular window or [Polygonal]: (Specify a point or choose an option.)
A selection rectangle displays dynamically.

Selected entities display in yellow; candidate reference curves display in blue.

Opposite Corner: (Specify a point. Make sure the selection rectangle overlaps at least one candidate reference curve entity.)

All entities within the selection window will be moved. Entities crossing the selection window will be used as reference curves.

A copy of the selected entities displays dynamically.

Blue arrows indicate the anchor points (3) of the reference curves.

Pick to place entities or [Region]: (Move the selection over a similar location or choose an option.)
The reference curves snap to matching lines under the cursor.

(Move the cursor to the other side of the reference curves to mirror the selection set.)

(Click to place the entities or type a distance in the dynamic entry fields. Press the TAB key to jump to the other field. Press Enter to confirm the distance.)

Command Options

Related Commands

CopyGuided - makes copies entities using reference geometry