Crops a point cloud entity, displaying only the part of the point cloud inside or outside a prismatic or cylindrical volume.
Accessing the Command
Select point cloud entity: (Select a point cloud.)
Crop option [Rectangular/Circular/Polygonal/Invert/showToggle/removeLast/removeAll] <Rectangular>: (Choose an option or press Enter to create a rectangular cropping.)
|uncropped point cloud||rectangular cropping inside||rectangular cropping outside|
Note: Multiple cropping volumes can be combined.
Creates a rectangular prismatic cropping.
Creates a cylindrical cropping.
Creates a polygonal prismatic cropping.
|Invert||Inverts the current cropping; toggles the cropping inside/outside and vice versa.|
|Show Toggle||Toggles the current cropping on/off.|
|Remove Last||Removes the most recently added cropping volume.|
|Remove All||Removes all cropping.|
AttachmentsPanelOpen - displays the Attachments panel from which point clouds and other attachments can be loaded and controlled.
PointCloud2dVsDisplay - controls whether a bounding box and a warning message display when trying to view a point cloud in the 2D Wireframe visual style.
PointCloud - opens the Drawing Explorer to the Point Cloud section; converts, loads, and unloads point cloud file attachments.
PointCloudAlign - rotates the point cloud to optimally align it with the X and Y axes.
PointCloudAttach - attaches point cloud files (that were previously converted to BricsCAD's BPT format) to the current drawing.
PointCloudBoundary - sets the display of the bounding box of point clouds.
PointCloudColorMap - colorizes the points based on Intensity, Elevation, and Classification of the point cloud.
PointCloudDeleteItem - deletes point cloud files from the cache folder through a dialog box.
PointCloudExport - exports a cropped selection of a point cloud to a .pts file.
PointCloudImport - imports a VRM file into the current point cloud cache location through a dialog box.
PointCloudPointMax - defines the maximum amount of points shown per point cloud.
PointCloudPointSize - specifies the size of points.
PointCloudPointSize_Minus - decreases the size of points.
PointCloudPointSize_Plus - increases the size of points.
PointCloudReference - attaches point cloud files from the cache folder to the current drawing through a dialog box.
PointCloudUncrop - removes all croppings from a point cloud.