Defines a reference and an opposing face to control the ply layout of a composition.
If one of the plies of the composition has a variable thickness, the reference and opposing face can be non-parallel. In this case the fixed thickness plies are set out starting from the reference face, and the remainder of the solid is filled by the variable ply.
Accessing the Command
Select reference face: (Select the reference face of the solid.)
- If the selected face is parallel to the opposing face:
Opposing face(s) are detected [Select manually] <Accept>: (Press Enter to accept the parallel face or typ S to manaully select the opposing face manually.)
- If the selected face is not parallel to the opposing face:
Select opposing face: (Select a face.)
Reference face was set.
|Solids without composition||Multiply composition assigned
Reference faces are either wrong or not found
|Defining reference face (1)
and opposing face (2)
|Attaching a composition
Reference faces highlight
Allows to select the opposite face manually.
BimAttachComposition - attaches a BIM composition to solids.
BimFlip - flips the starting face from which the layers of a composition are set out.