Go to bricsys.com
Toggles entity snap modes for 3D entities at the command line (short for "3D object snap").
Accessing the Command
command bar: -3dosnap
transparent: '-3dosnap
: -3dosnap
Prompts you in the command bar:
3d Snaps: ZNEArest/ZVERtex/ZMIDpoint/ZCENter/ZPERpendicular/ZKNOt/ZINTersection/ON/<OFF>: (Enter an option.)
To set more then one snap mode at the same time, separate their names with commas; you need only type the uppercase portion of each snap name.
ZNEArest/ZVERtex/ZMIDpoint/ZCENter/ZPERpendicular/ZKNOt/ZINTersection/ON/<OFF>: (znea,zmid)
Opzioni del comando
|
Opzione |
Descrizione |
|
ZVICino |
Snaps to a point on the face of a 3D entity that is nearest to the cursor, equivalent to the ZNearest command. |
|
ZVERtice |
Snaps to the closest vertex of a 3D entity, equivalent to the ZVertex command. |
|
ZMEDio |
Snaps to the midpoint of a face's edge, equivalent to the ZMidpoint command. |
|
ZCENtro |
Snaps to the center of a flat or curved 3D face, equivalent to the ZCenter command. |
|
ZPERpendicolare |
Snaps to a point perpendicular to a face, equivalent to the ZPerpendicular command. |
|
ZNODo |
Snaps to a knot on a spline, equivalent to the ZKnot command. |
|
ZINTersezione |
Snaps to the intersection of linear entities, edges and polar or entity snap tracking lines with faces, equivalent to the ZIntersection command. |
|
oN |
Enables all currently set 3D snap modes, equivalent to the ZNone command. |
|
OFF |
Disables all currently set 3D snap modes, equivalent to the ZNone command. |
Comandi Correlati
3dOsnap - sets the entity snap modes for 3D entities through the Settings dialog box.
OSnap - sets entity snaps through the Settings dialog box.
-OSnap - toggles entity snap modes at the command line.
Aperture - sizes the aperture cursor for entity snaps.
Zcenter - toggles the 3D center entity snap. Snaps to the center of planar or curved 3d faces.
Zintersection - Attiva / disattiva lo snap al punto di intersezione 3D. Esegue lo snap all'intersezione di entità lineari, bordi e linee di tracciamento snap polare o entità con facce.
Zknot - toggles the 3D knot entity snap. Snaps to a knot on a spline.
Zmidpoint - toggles the 3D midpoint snap. Snaps to the midpoint of a face edge.
Znearest - attiva lo snap all'entità 3D più vicina. Esegue lo snap ad un punto sulla faccia di un'entità 3D più vicina al cursore.
Znone - disables all 3d snap modes.
Zperpendicular - toggles the 3D perpendicular entity snap. Snaps to a point perpendicular to a face.
Zvertex - toggles the 3D vertex entity snap. Snaps to the closest vertex of a 3d entity.
