Accessing the Command
command bar: dcradius
menu bar: Parametric | 2D Constraints | Radius
toolbar: 2D Constraints |
ribbon: Parametric | 2D Constraints | Radius
Prompts you in the command bar:
Select arc, circle or curved polyline segment: (Select a circle, arc or polyline arc segment)
Specify dimension location: (Select a point to position the dimension line)
Dimension text <xx.xx>: (Type a value, or else press Enter to accept the current value)
The radius of the entity is now constrained, although the entity can still be moved, rotated, and so on.
Select arc, circle or curved polyline segment:
|Specify dimension location||Move the cursor, and then pick a point to position the dimension line|
|Dimension text <xx.xx>||
Dimconstraint - applies a dimensional constraint to an entity or between constraint points on entities; converts associative dimensions to dynamic dimensions.
Geomconstraint - applies geometric relationships between entities and/or valid constraint points on entities.
DcAligned - constrains the distance between two points.
DcAngular - constrains the angle between two lines or linear polyline segments; the total angle of an arc or an arc polyline segment; or the angle between three points on entities.
DcConvert - converts an associative dimension to a dimensional constraint.
DcDiameter - constrains the diameter of a circle or an arc.
DcHorizontal - constrains the horizontal distance (X-distance) between two points with respect to the current coordinate system.
DcLinear - constrains the horizontal distance (X-distance) or vertical distance (Y-distance) between two points with respect to the current coordinate system.
DcVertical - constrains the vertical distance (Y-distance) between two points with respect to the current coordinate system.
ConstraintBar - controls the display of the constraint bar of entities.
DcDisplay - allows to set dimensional constraints to be displayed or hidden.
Delconstraint - removes all dimensional and geometrical constraints from an entity.
CleanUnusedVariables - purges variables not used in constraint expressions and not linked to dimensions.
-Parameters - manages 2D dimensional constraint parameters and user variables in the current drawing.