Polecenie: SZYK i -SZYK
Polecenie kopiuje obiekty w sposób regularny jako szyk prostokątny i kołowy.
Pole dialogowe wyświetli:
Pole dialogowe wyświetli:
Tworzenie szyku prostokątnego
The ArrayRect command associatively distributes entity copies into any number of rows, columns, and levels.
Tworzenie szyku kołowego
Creating a 3D rectangular array
- Wpisz szyk lub AR w pasek poleceń i wciśnij Enter.
A dialog box displays:
2. W Rodzaj Szyku wybierz Prostokątny.
3. Naciśnij przycisk Wybierz Elementy ().
Okno dialogowe Szyk zamknie się tymczasowo aby umożliwić wybór elementów.
4. Wybierz elementy, następnie kliknij prawym przyciskiem lub naciśnij ENTER.
Okno dialogowe Szyk otworzy się ponownie.
5. Wypełnij pola Ustawień lub naciśnij Wybierz punkty () aby zdefiniować ustawienia na ekranie.
Okno dialogowe Szyk zamknie się tymczasowo aby umożliwić wybór punktów.
|
Row offset (A) and column offset (B) can be defined by the spacing rectangle (red). |
6. Naciśnij przycisk OK aby utworzyć szyk.
UWAGA |
Positive values in steps 4 and 5 are measured along the positive X- and Y-axis of the current UCS. Negative values are measured in the opposite direction. |
Creating a static polar array
- Wpisz szyk lub AR w pasek poleceń i wciśnij Enter.
A dialog box displays:
2. W Rodzaj szyku wybierz Biegunowy.
3. Naciśnij przycisk Wybierz Elementy ().
Okno dialogowe Szyk zamknie się tymczasowo aby umożliwić wybór elementów.
4. Wybierz elementy, następnie kliknij prawym przyciskiem lub naciśnij ENTER.
Okno dialogowe Szyk otworzy się ponownie.
5. Wybierz opcję Oblicz: Kąt pomiędzy, Kąt do wypełnienia lub Liczba elementów.
Pole ustawień wybranej opcji jest przyciemnione.
6. Wypełnij pola Ustawień lub naciśnij Wybierz punkty () aby zdefiniować ustawienia na ekranie.
Okno dialogowe Szyk zamknie się tymczasowo aby umożliwić wybór punktów.
7. (option) Check the Rotate items as copied option.
|
Entities rotated (left) or not (right) about the center point of the array. |
8. (opcjonalnie) Zdefiniuj Punkt bazowy obiektu.
|
Polar array with base point (dot) and center point (cross). |
Tworzenie statycznej trójwymiarowej tablicy prostokątnej
- Wykonaj jedno z poniższych:
- Click the 2D Array tool button (
) on the Modify toolbar.
- Wybierz polecenie Szyk 2D z menu Zmiana.
- Type 3darray in the command bar, then press Enter.
You are prompted: Select entities to array:
2. Select the entities, then right click or press Enter.
You are prompted: Type of array: Polar/<Rectangular>:
3. Choose Rectangular in the prompt menu or type R in the command bar and press Enter.
You are prompted: Number of rows in the array <1>:
4. Type the number of rows in the command bar, then press Enter.
You are prompted: Number of columns <1>:
5. Type the number of columns in the command bar, then press Enter.
You are prompted: Number of levels <1>:
6. Type the number of levels in de command bar, then press Enter.
You are prompted: Vertical distance between rows:
7. To define the distance between rows of the array, do one of the following:
- Type the distance in the command bar and press Enter.
- Specify the distance by clicking two points.
You are prompted: Horizontal distance between columns:
8. To define the distance between the columns of the array, do one of the following:
- Type the distance in the command bar and press Enter.
- Specify the distance by clicking two points.
You are prompted: Depth between levels:
9. To define the distance between the levels of the array, do one of the following:
- Type the distance in the command bar and press Enter.
- Specify the distance by clicking two points.
The array is created.
|
Rectangular 3D Array:row spacing A, column spacing B, level spacing C |
UWAGA |
Positive values in steps 7, 8 and 9 are measured along the positive X-, Y- and Z-axis of the current UCS. Negative values are measured in the opposite direction. |
Creating a static 3D polar array
- Wykonaj jedno z poniższych:
- Click the 2D Array tool button (
) on the Modify toolbar.
- Wybierz polecenie Szyk 2D z menu Zmiana.
- Type 3darray in the command bar, then press Enter.
You are prompted: Select entities to array:
2. Select the entities, then right click or press Enter.
You are prompted: Type of array: Polar/<Rectangular>:
3. Choose Polar in the prompt menu or type P in the command bar and press Enter.
You are prompted: ENTER to specify angle between items/<Number of items to array>:
4. Type the number of items you want in the array, then press Enter.
You are prompted: Angle to array (+ for ccw, - for cw) <360>:
5. Wykonaj jedno z poniższych:
- Type the angle to array, then press Enter.
- Press Enter to create a 360° array.
You are prompted: Rotate entities around the array? No/<Yes>
6. Do one of the following:
- Press Enter to rotate the entities about the array axis.
- Type N and press Enter to keep the original orientation of the entities.
You are prompted: Center of polar array.
7. Specify the first point of the array axis.
You are prompted: Specify second point along central axis of array:
8. Specify the second point of the array axis.
The array is created.
|
Polar 3D array about a horizontal axis (red). |