CURVECALC command
Calculates curve parameters based on input and adds it to the drawing.
Description
Opens the Curve Calculator dialog box to set the curve parameters and draw the curve in the drawing.
下図は、曲線の各パラメータを示しています。

円弧の定義
円曲線の角度が円弧の定義によって定義されます。すなわち、円曲線の角度が円弧によって決まります。このオプションは、円曲線の角度が、100単位の円弧の角度に対応する道路曲線でよく使用されます。

弦の定義
円曲線の角度が弦の定義によって定義されます。すなわち、円曲線の角度が弦によって決まります。このオプションは、円曲線の角度が、100単位の弦に対応する鉄道曲線でよく使用されます。

半径または中心角に基づいて計算されます。
- 半径寸法
- チェックを入れると、半径を固定して計算が開始されます。
- 中心角
- チェックを入れると、中心角を固定して計算が開始されます。
- 接線長
- 曲線の接線の長さを設定します。
- 円弧長
- 曲線の円弧の長さを設定します。
- 弦長
- 曲線の弦の長さを設定します。
- 外部距離
- 曲線の外部距離の長さを設定します。
- 中間縦距離
- 曲線の中央縦長を設定します。
- 円曲線の角度
- 円曲線の角度を設定します。円曲線の角度は、円弧の定義による場合は円弧によって、弦の定義による場合は弦によって決まります。
- 図面の円弧を選択
- 図面から円弧を選択することができます。
- 曲線を作成
- 曲線計算ダイアログボックスが一時的に閉じて、計算された曲線が図面に作図されます。
Options within the command
- Select Entity
- Allows you to select an entity from the drawing.Note: When you choose an entity as the starting point of the curve, the curve drawn will be tangent to that entity.
- Point
- Allows you to select the curve origin by picking a point in the drawing.
- Select curve direction
- Allows you to set the curve direction.
- Select curve side
- Allows you to pick the side of the curve.
- Left
- Places the curve to the left side.
- Right
- Places the curve to the right side.